SWS BL–C BOLT Load Cell
- Home
- SWS BL–C BOLT Load Cell
SWS BL–C BOLT Load Cell
With continuous monitoring, it is a lot easier to determine the bolt load while the load cell is mounted, at any time. In addition to checking the bolt load at any given time,
it is also possible to view historical data. This helps to determine when and where a problem with the bolt load might have occurred. where data from all sensors can be monitored RS-232 and Analog Converter . The live data from the bolt load cells can be checked remotely with different readout methods.
Features
| Sizes | To fit bolt sizes from M20 to M72 |
| Cable lengths | Standard: 1 meter (optionally 5 or 10 meter) |
| Full Scale Load (FS) | From 166 kN to 2500 kN depending on sensor size |
| Maximum Load at ambient temperature | FS range x 1.3 (without affecting the validity of the calibration) |
| Temperature range | -40°C to 80°C |
| Minimum Load | 10% FS |
| Total accuracy at ambient temperature (rms) | < 5 % FS (machined parallel surfaces in bolt-nut assembly) |
| Linearity | < 1.5 % FS |
| Hysteresis | < 0.9 % FS |
| Creep | < 0.1 % FS |
| Repeatability | < 0.5 % FS |
| Typical Temperature effects | < ± 0.08 % FS/°C |
| Sealing | IP66 |
| Material | Tool Steel |
| Sensor Output | MV |
| Power Supply | Powered through electronic interface Maximum 12 v DC |
| Connection | M12 connector male 5 pole |
